View ST333C1111_1317430.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Previous Datasheet
Index
Next Data Sheet
DISCRETE POWER DIODES and THYRISTORS
DATA BOOK
To Order
Previous Datasheet
Index
Next Data Sheet Bulletin I25170/A
ST333C..C SERIES
INVERTER GRADE THYRISTORS Features
Metal case with ceramic insulator International standard case TO-200AB (E-PUK) All diffused design Center amplifying gate Guaranteed high dV/dt Guaranteed high dI/dt High surge current capability Low thermal impedance High speed performance
Hockey Puk Version
720A
Typical Applications
Inverters Choppers Induction heating All types of force-commutated converters
case style TO-200AB (E-PUK)
Major Ratings and Characteristics
Parameters
IT(AV) @ Ths IT(RMS) @ Ths ITSM @ 50Hz @ 60Hz I 2t @ 50Hz @ 60Hz V DRM /V RRM tq range TJ
ST333C..C
720 55 1435 25 11000 11500 605 553 400 to 800 10 to 30 - 40 to 125
Units
A C A C A A KA2s KA2s V s
C
To Order
Previous Datasheet ST333C..C Series
ELECTRICAL SPECIFICATIONS Voltage Ratings
Voltage Type number Code
Index
Next Data Sheet
V DRM /V RRM , maximum repetitive peak voltage V
VRSM , maximum non-repetitive peak voltage V
500 900
I DRM /I RRM max.
@ TJ = TJ max.
mA
50
ST333C..C
04 08
400 800
Current Carrying Capability
Frequency
180oel 50Hz 400Hz 1000Hz 2500Hz Recovery voltage Vr Voltage before turn-on Vd Rise of on-state current di/dt Heatsink temperature Equivalent values for RC circuit 1630 1630 1350 720 50 V DRM 50 40
ITM 180oel 1420 1390 1090 550 50 50 55 2520 2670 2440 1450 50 V DRM 40
ITM 100s 2260 2330 2120 1220 50 55 7610 4080 2420 1230 50 V DRM 40
ITM
Units
6820 3600 2100 1027 50 55 V A/s C A
10 / 0.47F
10 / 0.47F
10 / 0.47F
On-state Conduction
Parameter
I T(AV) Max. average on-state current @ Heatsink temperature I T(RMS) Max. RMS on-state current I TSM Max. peak, one half cycle, non-repetitive surge current
ST333C..C
720 (350) 55 (75) 1435 11000 11500 9250 9700
Units Conditions
A C 180 conduction, half sine wave double side (single side) cooled DC @ 25C heatsink temperature double side cooled t = 10ms A t = 8.3ms t = 10ms t = 8.3ms t = 10ms t = 8.3ms KA2s t = 10ms t = 8.3ms KA2s No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max
I2t
Maximum I2t for fusing
605 553 428 391
I 2 t
Maximum I2t for fusing
6050
t = 0.1 to 10ms, no voltage reapplied
To Order
Previous Datasheet ST333C..C Series
Index
Next Data Sheet
Fig. 3 - Current Ratings Characteristics
Fig. 4 - Current Ratings Characteristics
Fig. 5 - On-state Power Loss Characteristics
Fig. 6 - On-state Power Loss Characteristics
Fig. 7 - Maximum Non-repetitive Surge Current
To Order
Fig. 8 - Maximum Non-repetitive Surge Current
Previous Datasheet
Index
Next ST333C..C Series Data Sheet
Fig. 9 - On-state Voltage Drop Characteristics
Fig. 10 - Thermal Impedance ZthJ-hs Characteristics
Fig. 11 - Reverse Recovered Charge Characteristics
Fig. 12 - Reverse Recovery Current Characteristics
Fig. 13 - Frequency Characteristics
To Order
Previous Datasheet ST333C..C Series
Index
Next Data Sheet
Fig. 14 - Frequency Characteristics
Fig. 15 - Frequency Characteristics
Fig. 16 - Maximum On-state Energy Power Loss Characteristics
To Order
Previous Datasheet
Index
Next ST333C..C Series Data Sheet
Fig. 17 - Gate Characteristics
To Order
Previous Datasheet
On-state Conduction
Parameter
V TM Max. peak on-state voltage voltage V T(TO)2 High level value of threshold voltage r t1 r t2 IH IL Low level value of forward slope resistance High level value of forward slope resistance Maximum holding current Typical latching current 0.58
Index
NextST333C..C Series Data Sheet
ST333C..C Units
1.96 0.91 0.93 V
Conditions
ITM= 1810A, TJ = TJ max, tp = 10ms sine wave pulse (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. (I > x IT(AV)), TJ = TJ max. (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. (I > x IT(AV)), TJ = TJ max.
V T(TO)1 Low level value of threshold
m 0.58 600 1000 mA
T J = 25C, I T > 30A T J = 25C, V A= 12V, Ra = 6, I G= 1A
Switching
Parameter
di/dt Max. non-repetitive rate of rise of turned-on current td tq Typical delay time Min 10
ST333C..C Units
1000 1.1 Max 30 s A/s
Conditions
TJ = TJ max, VDRM = rated VDRM ITM = 2 x di/dt TJ= 25C, VDM = rated VDRM, ITM = 50A DC, tp= 1s Resistive load, Gate pulse: 10V, 5 source TJ = TJ max, ITM = 550A, commutating di/dt = 40A/s VR = 50V, tp = 500s, dv/dt: see table in device code
Max. turn-off time
Blocking
Parameter
dv/dt IRRM IDRM Maximum critical rate of rise of off-state voltage Max. peak reverse and off-state leakage current
ST333C..C Units
500 50 V/s mA
Conditions
TJ = TJ max. linear to 80% VDRM, higher value available on request TJ = TJ max, rated V DRM/V RRM applied
Triggering
Parameter
PGM Maximum peak gate power
ST333C..C Units
60 10 10 20 V W A
Conditions
TJ = TJ max., f = 50Hz, d% = 50 TJ = TJ max, tp 5ms
PG(AV) Maximum average gate power IGM +VGM -VGM IGT VGT IGD VGD Max. peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage Max. DC gate current required to trigger Max. DC gate voltage required to trigger Max. DC gate current not to trigger Max. DC gate voltage not to trigger
TJ = TJ max, tp 5ms
5 200 3 20 0.25 mA TJ = 25C, VA = 12V, Ra = 6 V mA V TJ = TJ max, rated VDRM applied
To Order
ST333C..C Series
Parameter
TJ Tstg
Previous Datasheet
Index
Next Data Sheet
Thermal and Mechanical Specification
ST333C..C
-40 to 125 -40 to 150 0.09 0.04 0.020 0.010 9800 (1000) wt Approximate weight Case style 83 TO - 200AB (E-PUK) K/W C DC operation single side cooled DC operation double side cooled DC operation single side cooled DC operation double side cooled
Units Conditions
Max. operating temperature range Max. storage temperature range
RthJ-hs Max. thermal resistance, junction to heatsink RthC-hs Max. thermal resistance, case to heatsink F Mounting force, 10%
K/W N (Kg) g
See Outline Table
RthJ-hs Conduction
(The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC)
Conduction angle
180 120 90 60 30
Sinusoidal conduction Rectangular conduction
Single Side Double Side 0.010 0.012 0.015 0.022 0.036 0.011 0.012 0.015 0.022 0.036 Single Side Double Side 0.007 0.012 0.016 0.023 0.036 0.007 0.013 0.017 0.023 0.036
Units
Conditions
K/W
TJ = TJ max.
Ordering Information Table
Device Code
ST
1 1 - Thyristor 2 - Essential part number 3 - 3 = Fast turn off 4 - C = Ceramic Puk
33
2
3
3
C
4
08
5
C
6
H
7
K
8
1
9 10
5 - Voltage code: Code x 100 = VRRM (See Voltage Rating Table) 6 - C = Puk Case TO-200AB (E-PUK) 7 - Reapplied dv/dt code (for tq test condition) 8 - tq code 9 - 0 = Eyelet term. (Gate and Aux. Cathode Unsoldered Leads) 1 = Fast-on term. (Gate and Aux. Cathode Unsoldered Leads) 2 = Eyelet term. (Gate and Aux. Cathode Soldered Leads) 3 = Fast-on term. (Gate and Aux. Cathode Soldered Leads) 10 - Critical dv/dt: None = 500V/sec (Standard value) L = 1000V/sec (Special selection) dv/dt - tq combinations available
dv/dt (V/s) 10 12 15 tq (s) 18 20 25 30 20 CN CM CL CP CK --50 DN DM DL DP DK --100 EN EM EL EP EK --200 -FM * FL * FP FK FJ -400 --HL HP HK HJ HH
*Standard part number.
All other types available only on request.
To Order
Previous Datasheet
Outline Table
Index
Next Data Sheet ST333C..C Series
ANODE TO GATE CREEPAGE DISTANCE: 11.18 (0.44) MIN. STRIKE DISTANCE: 7.62 (0.30) MIN. 25.3 (0.99) DIA. MAX. 0.3 (0.01) MIN.
14.1 / 15.1 (0.56 / 0.59) 0.3 (0.01) MIN. 25.3 (0.99) DIA. MAX. 40.5 (1.59) DIA. MAX. GATE TERM. FOR 1.47 (0.06) DIA. PIN RECEPTACLE
Case Style TO-200AB (E-PUK)
All dimensions in millimeters (inches)
2 HOLES 3.56 (0.14) x 1.83 (0.07) MIN. DEEP 6.5 (0.26) 4.75 (0.19)
25 5
42 (1.65) MAX. 28 (1.10)
Fig. 1 - Current Ratings Characteristics
Fig. 2 - Current Ratings Characteristics
To Order

▲Up To Search▲

Price & Availability of ST333C1111

	To Download ST333C1111 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .